Category: Home Renovations

Categories
Home Renovations

5 Simple Steps for Exterior Wood Siding Restoration

Wood performs an essential role in the construction of exterior and interior of house elements. The wooden items are to be taken care of regularly otherwise there is a chance that the wood begins to deteriorate. Even the best wood types can become prey to the exterior dust, humidity, and heat from the sun. Can you restore the wood structure if it is in the right shape? Yes! Follow the below 5 Simple Steps for Wood Siding Restoration like a pro.

5 Important Steps to Follow

1. Remove the Old Paint on the Wood :

Before the actual restoration process has begun, the paint on the wood has to be removed. The paint removal is done to see what are the damages in the wood. To have the paint removed, use tools like heat gun and putty knife. Do not use gunfire that emits fire as it can damage the wood. Use an electric gun that emits heat only. The heat emitted from the gun cracks the paint on the wood, then using the putty knife have the paint removed. It’s not easy to remove all the paint at once. Remove part by part by using the heat gun and putty knife. Continue the process unless all the damages can be seen clearly and you are sure that the paint from the wood is completely removed.

2. Sand and Fill the Exterior Wood :

Once the scraping of paint is completed, check for the areas where the wood got damaged and repair them. In the process use a wood filler to fill all the gaps you meet, cover the loose gaps using caulk. After the gaps are filled up, wait for sometime for the fillings to be dried out completely. The sandpaper can be used to remove any unwanted materials formed during the filling and caulking process. After the completion of the sanding wash the wood materials by using the garden hose.

3. Repair and Restore the Wooden Structures :

The decorative wooden items have many joints and connections. Exposed joints can be broken and lead to the whole damage of the structure. So use procedures like re-gluing, clamping, tightening, replacing on loose screws, nails, and wood strips. Using galvanized fasteners inhibits rusting. Refinishing is another option available for repairing the old wooden flooring or items of your house.

4. Apply Primer :

After the complete washing of the wood items, it’s time to get it painted. Even before painting, the primer is to be applied to the surface. Before the application of Primer, the surface should be dry and free from impurities. Select a high-quality primer and also the color of the primer should be matching with the paint color that you wish to paint on the wooden surface. Apply the primer evenly on the wooden surface. Go for another coating if the first coat of the primer does not help in saturation of the wood.

5. Protect and Beautify with Paint :

The paint helps in protecting the surface of the wood. So be careful in selecting the paint. Gloss paint protects from moisture and humidity. The paint should be applied to the primer for getting a smooth and desired finish. If you are painting for wood items outside the house, then its better to go for UV protection paints, so that the paint protects the wooden items from the harsh UV rays. But make a note that even the most expensive paint cannot protect the structure for a lifetime, so repainting is to be done every 3-5 years.

Conclusion

Maybe it is a wood siding, a deck, a fence or any other type of wooden structure the restoration can be done easily by following the above wood siding restoration process if it is in a decent shape. But the restoration of some moderately damaged wooden structures definitely requires expert hands. If you came to know that you require a professional contact Executive Touch Painters in Toronto for customized carpentry and trim works or call us at (416)-410-0164 now to book a free estimate.

Categories
Home Renovations

How to Install Crown Molding?

One of the excellent ways to add beauty to a room is to use crown moldings on the walls. The installation process is however complicated for the homeowners to do by themselves. With proper research and right tools, homeowners can do the work on their own. The appropriate molding selection plays the vital role in the cutting and installation of the molding on the walls. The color of the molding should match with the color of the walls. Wrong moldings and contrast colors can affect the beauty of the wall and room.

Tools Required for the Installation :

  • Crown Moldings
  • Miter Saw(Electrical)
  • Measuring Tape
  • Drill, Hammer, and Nails
  • Caulk and Wood Filler
  • Pencil for Marking
  • Stud Finder
  • Fine Grit Sandpaper

Instructions for Installing Crown Molding :

1. Choosing the Molding for the Room

First, you need to choose the correct molding for the room. The moldings are available in different colors and shapes in the market. You should select the molding according to the requirement of the room. Most of the people tend to choose moldings with more carving details in them. If the work is done by a professional, then you can select the molding with detailed carvings. If you have chosen to do the work by yourself, then be careful in choosing the molding. The molding must also be matching to the colors and decorations of the room.

2. Take the Measurements of the Wall

Using the measuring tape, take the exact measurements of the wall. Make a note of all the measures on a paper. With the help of stud finder, find all the studs and a pencil marking on the stud. The marking is to make as you should nail the moldings to the studs. If possible try to select the moldings precisely as the measurements of the wall.

3. Cutting the molding

The most critical job in the installation of the molding. Most of the cases the angle between the moldings would be 45 degrees, and the cutting would not be a tough task. (Read our previous article on How to Cut Crown Molding)

4. Installation of the Moldings

Nail the crown moldings to the walls. Be sure that you hammer the nails precisely to the studs that you have marked. For the installation at the corners blocks, see that the cut moldings are fitting correctly with the ones on the adjacent side.

5. Filling the Nail Holes and Caulking

After attaching the moldings to the wall, fill the holes formed by the nails with the wood filler and use the sandpaper to make a smooth finish. If there are any gaps between the moldings, fill them with the caulk. Make a smooth finish using the fine grit sandpaper.

Kitchen Cabinet Crown Molding :

Installation of moldings in a kitchen room is a good idea, and also it updates the appearance of the cabinets of the kitchen. Crown moldings in the kitchen too add value to our home at the time of selling.

Here are the Steps for Installation of the Crown Moldings on the Kitchen cabinets

1. Measure: Take the length of the cabinets where you wish to install the crown moldings. Take the precise measurements, and you can always purchase a little extra length of molding than the required.

2. Cutting: As per instructed in the above procedure make the cuttings required, with the miter saw. The crown molding angles are mostly 45 degrees for the edges. Make sure that the cut pieces are fitting into each other exactly.

3. Installation: Place the molding on the top of the cabinets and with the help of hammer and nails, nail the molding into the place. Make sure the nails are nailed correctly so that the molding does not come out of the wall. Be careful at the edges of the walls and cabinets. The cut moldings should fit into one another perfectly for a smooth finish.

4. Caulking: After completing the installation, use the caulk to fill up the gaps. You can also use wood glue to seal the holes. Use the sandpaper to remove the excess caulk and wooden glue present after application.

Conclusion

Installing Crown moldings on the walls and cabinets of the kitchen is the very tough job that cannot be completed by the homeowners themselves. So, you need to hire an expert for the job. Our Professionals at Executive Touch Painters are always there to help you in crown moldings and all other types of home renovations in Toronto. Call us at 416-410-0164 or Contact us for more details like the cost etc., and get a Free Estimate Now!

Categories
Home Renovations

How To Cut Crown Molding

Crown molding is the piece of wood that sits in between the corners of the wall and ceiling at about 45-degree angle. The moldings can be at the bottom or the top of the corners. Cutting the moldings is not tricky, but could be if the walls are not exactly square in shape.

Tools you need for Cutting the Crown Molding

  • Miter Box
  • Pencil
  • Coping and Handsaw
  • Dowel
  • Combination Square
Steps for Cutting the Crown Mold
  • Insert the crown molding in the miter box with bottom edge facing upwards. Hold it at an angle, to fit against the corners of the base and ceiling. Now cut the side at an angle of 45-degrees. The edge that is on the bottom of the box is the longer edge.
  • Now remove the saw from the pair of the notches and insert into another pair so that it’s played in the opposite direction.
  • Miter the edges in the same way for a smooth finish.
  • Use a coping saw to fit crown moulding in inside corners that aren’t square. Begin by cutting the edge of one section of molding at a 90-degree angle and securing it in position with that end flush against the wall.

Tip: If you wish to paint the edges, use acrylic latex caulk to fill up the imperfect gaps.

How to Cut Inside Corner of Crown Molding?

1. Measure the Angle of the Corner between the Walls :

Use a Protractor to measure the exact angle of the edge. Most precisely the angle would be 90-degree, must measure the correct angle. Make sure that the protractor is placed parallel to the bottom and ceiling, to get the right angle. Cut each of the two crown molding pieces at half of the measured angle to make them fit precisely in the corner.

2. Cut the Right Side Corner :

Set the compound miter saw to the required angle. Place the piece to be cut on the bed of the saw and cut while you held the mold with your left hand. Be sure that the bottom of the molding should be up when you make the cutting. Do not turn the saw while cutting, as it might change the angle.

3. Cut the Left Side Corner :

Now set the angle again on the miter and make the cutting of the left corner. Place the molding on the bed of the saw and while you held the mold with the right hand, make the cut. Here also the bottom of the molding should be kept up while cutting and also the saw should not be turned while cutting.

Warning: Take precautionary measures when working on the miter and saw.

How to do Crown Molding Outside Corner Cuts?

1. Mark the Length Required :

Marking is the crucial step to be done carefully. Measure the length of the crown needed for the outside corners of the walls. Using a tape, measure the dimensions of the outer edge where the molding is to be fitted. Mark the lengths clearly with a pencil.

2. Determine the Angles :

Using a large protractor measure the angle between the outside corners. Note down both outer angles from each corner of the wall.

3. Cut the Molding using a Miter Saw :

A miter saw is a device needed now. The miter saw is used to cut the crown mouldings at the particular angle that is required. Set the required angle in the miter saw and cut one of the moldings. Pick up the second molding piece and perform the cutting by placing it upside down on the saw. Pick up the two pieces and check if they fit on the outside corner perfectly. Usually, the angle for cutting the moldings is 45 degrees.

Now that you came to know about how to cut crown molding, follow the next step of installing crown molding here.

Conclusion

The above-mentioned instructions on how to cut crown molding will be helpful if you had some previous experience in using the sharp tools, else it is a wise decision to get your job done by a professional because a single mistake made in the process can create a whole mess and will result in the loss of material, money and of course your valuable time. Our Professionals at Executive Touch Painters and Home Renovations Ltd has got years of experience in various custom carpentry and trim work for residential and commercial spaces in Toronto. Contact or Call us at 416-410-0164 for a Free Estimate Now!

Categories
Home Renovations

How to Frame a Basement Wall?

Framing your basement walls is the first step in finishing your basement. Get ready, because this is when all of your time spent researching, planning, and designing your basement will finally pay off. First, decide on the type of frame that you got to be installed on the wall.

Materials Required for Basement Framing

  • Foam Board
  • Foam Board Glue
  • Drills and Drill Bits
  • Hammer and Nails
  • Saw (For Cutting)
  • Drywall Screws
  • Safety Goggles

Step by Step Process to Frame a Basement Wall

1. Exterior Wall Set-Up :

Prepare the exterior wall before installing the frames to them. Before attaching the foams, check for any damages to the walls and repair them if necessary. Make markings on the wall for studs and make sure to make the same marking on the foam boards as well. Foam Boards are used to keep the basement energy efficient. Drill holes through the foam board to the exterior walls and hammer in the screws through each hole.

2. Prepare the Frame :

Start assembling the wall frame on the floor and it’s faster and easier to construct a wall on the ground. Make markings on the frame, where the studs are to be installed. Have all the markings face the same direction, so its easy to nail them and avoid a curved wall. It’s comfortable to construct your frame with the crowns up; that way both ends of the studdings are solidly on the ground when you attach the top and bottom plates. Be careful in building the frame so that it can tip up quickly without getting stuck in the room edges.

3. Tip the walls :

It’s usually comfortable to tip a wall up with the bottom plate against the wall, but if the floor joists are sagging or there are pipes, you may have to raise the top of the wall in first and push the bottom plate into place.

4. Fasten the bottom frame first :

After tipping up the structure to the wall, time to fasten the frame to the wall. You can use construction adhesive and nails to secure the bottom frame to the wall. Wear safety glasses and gloves for protection. You can use drilling machine to make holes and nail down the screws and fasten the frame.

5. Fasten the Top of the frame to the wall :

Nail the top frame to every joist present and use plumbing tools to secure the nails on to the structure. It’s not essential to adjust the studs straight under floor joists, but it’s a good idea if you plan to run ductwork or pipes in the walls.

6. Inside Corners :

When there are inside corners, turn the last board on the first wall sideways and overlap it about halfway pass the connecting wall. By making in this way, you can fasten the two walls together.

Conclusion

You require patience and well planning for framing a basement wall. If you want a professional to take off the hassle on you? Contact Executive Touch Painters in Toronto for expert basement renovations. Call us at 416-410-0164 and get a Free Estimate on the cost to frame a basement wall.

Categories
Home Renovations

How To Install Baseboard?

Baseboard molding on the walls of your house give a final appearance and also add beauty to the home. Baseboard moldings are the final trims to be done in the rooms and are meant to fill gaps between the wallboard and floors. The moldings also form a pleasingly cohesive perimeter. The moldings are added after the painting to the room is completed.

Choosing a Baseboard Style :

Always choose a board style that is complimenting to the room and should also mix well with the existing mill work of the room. There are a variety of board styles available, and you can choose from the best possible design.

Installing Baseboard

Materials Required for Installation :

Many materials are required to install a baseboard in your room. Some of them are mentioned here,

  • Baseboard Molding
  • Cap Molding
  • Measuring tape
  • Miter and Circular Saw
  • Stud Finder
  • Pencil and Level
  • Carpenters glue and Construction Adhesive
  • Nails and Nailgun
  • Hammer
  • Compass
1. Measuring and Cutting of the Molding :
  • Be careful while cutting the molds. The cutting should be done as per the measurements. Always cut few inches extra for the molds that meet outside the walls.
  • Make numbering on the molds, so it’s easy for installation.
  • Make sure that the floor is completely leveled, check once with the level.
2. Begin the Installation:
  • Start the installation at a convenient location.
  • Hammer two finishing nails through the board at each stud, near the top and bottom of the baseboard.
  • If needed added splices, when the length of the wall is more than the moldings.
  • See that the joint is not on the stud, where nails are nailed.
3. Miter Corners
  • To miter, the outside corners, fit the coped end of the molding first and then mark the joint location with the piece in place.
  • Keep in mind that corners are not always square. You may need to adjust joint angles slightly for a good fit.
4. Add Shoe Molding
  • To complete the work add shoe molding.
  • Place the shoe molding on the bottom of the molding and nail it to the baseboard.
  • To have a more traditional look, you can add cap molding at the top of the frame.
5. Review the work completed
  • After nailing the molding to the wall, leave it for some time and come back to check the work completed.
  • Use sandpaper to remove extra adhesive. Remove the sharp edges by using sandpaper.
  • Apply putty on the nail holes and let dry for some time
  • Add another coat of paint or putty if needed
  • After the putty is dried up, use the sandpaper to remove the extra putty and make it smooth.

Now that you have completed baseboard molding, it’s time to apply primer and paint to the molding.

Conclusion

For Painting services for your home Contact our Professional Painters at Executive Touch to get started or Call (416) 410-0164 to get a Free Estimate.

Categories
Home Renovations

How to Repair Stucco?

Stucco repair is the most used technique for repairing the damaged walls and ceilings. Traditional Stucco is prepared from sand, water, and lime. But in modern days it’s made from Cement, sand, and water. Stucco repairing technique is effortless for the homemakers, and you can also apply the texture to the stucco applied. Some stucco materials are water resistant, choose the best one suitable for your home.

Step by Step Process to Repair Exterior Stucco Walls or Ceilings

Step 1: Break the Loose Stucco

Using a hammer break up the loose stucco that is hanging on the walls and be careful not to damage the underlying wooden supports.

Step 2: Chip off the Edges

Continue the above step until you have found the stucco firmly adhered to the wooden support. Remove the wire mesh that is present.

Step 3: Cover the Exposed Lath

Trim the piece of builder’s paper with a utility knife tightly right at the point where the wood lath meets the old stucco. Fasten the paper further using some roofing nails then add the second layer on the top of the first.

Step 4: Add the mesh

Place galvanized metal lath over the paper and trimmed it tight against the edge of the concrete. Snips with offset handles will make this job easier. Drive more roofing nails through the mesh and into the wood lath.

Step 5: Mix up the ingredients and Prepare the Stucco

Wet the existing stucco so that it does not suck the moisture from the newly added one. Apply the stucco on the mesh attached to the old one. Smooth the stucco mix with a finishing trowel, then pack it against the edge of the old stucco with a brick trowel. Keep adding more material until this layer is about 1/2 inch below the existing stucco surface. Make scratches to improve the bond with the second coating. Cover the area coated with a plastic sheet and plaster it to stucco from drying out.

Step 6: Apply the Second Coat

Wait for seven days after completing the first coating. Remove the plastic and drizzle the patch with water. Mix stucco according to the second-coat recipe on the packet, and blade on a 3/8-inch-thick coat, working from the bottom up. Cover again with the plastic sheet.

Step 7: Finish it up with a Final Coat

After about three days remove the plastic cover, mix up the stucco and make a finishing coat that is matching with the remaining wall or ceiling.

Step 8: Wait to Paint the Area

Let the stucco patch prepared to be cured for a week before painting it. Make sure the painting is done carefully so that the spot is not visible.

Conclusion

So when are you thinking of repairing patches on wall or ceiling think of Stucco Repair? Patching of holes and repairing cracks can be a difficult task, so you need a professional Stucco Contractor in Toronto to get your job done right. We at Executive Touch Painters offer expert stucco repair service at affordable costs. Contact or Call us at (416) 410-0164 for a Free Quote or to clear your doubts.

Categories
Home Renovations

How to Drywall a Basement Ceiling

When working to complete and finish the house basement, the ceiling commonly proves to be the most tedious task. Installing basement drywall ceiling is the most cost-effective techniques to cover the floor joists and beams, and finishing your basement ceiling properly.

Basement Drywall Installation Process requires precise measurements and enough strength to undertake.

Steps to Prepare a Dry Basement Ceiling

Measure the area :

Before starting the process, make sure you have the correct measurements of the ceiling. Have the exact dimensions and then decide on the number of drywall sheets that are required.

Clean and repair the walls :

For basement drywall installation process you must have a surface which is free of oils and other substances. Choose a cleanser that is pH-neutral. Use a light-bristled scrub brush to scrub the walls. Rinse the walls with clean water and allow them to dry. Make sure that are no cracks and holes in the walls. Clean and repair all of the cracks and fixtures you located. Fill the cracks and small holes using joint sealant.

Hang full sheets of drywall to the basement ceiling :

Start from a corner of the basement and mark the position of the joists on the sheet. Have someone help you secure the drywall up to the basement ceiling, while you install it. Keep the drywall sheet in the desired place of the basement ceiling with one hand, and then drill with the other hand. Now drill into the joist. Move to the opposite corner and drill in another screw. When you have 3 or 4 bolts drilled, bring your hand down and drill in the other pins.

Make cuts in Drywall and hang the cut pieces :

Some parts of the basement ceiling need small pieces of drywall. Estimate the dimensions and label them on drywall. While hanging the pieces start with the smaller pieces and then go for the larger pieces.

Make cuts for the fixtures in the ceiling :

Do not forget there will be some lighting fixtures in the ceiling. Before fixing the drywall make sure that you make cuts for all the fixtures in the ceiling. Also, look out for any obstacles that are present and make cuts accordingly.

Taping and covering with mud :

After the drywall is hung onto the ceiling, see that ceiling joists are available for support. In addition to these joists, drywall screws are also used to have the drywall in their correct places. After fixing the bolts with a screw gun, cover all seams with drywall tape and mud. By coating with mud, we can get the finished product to be more smooth and ready for the primer application.

Conclusion

Basement Drywall Installation Process is a complicated task which can make things messed up in a way that cannot be undone. You need a Professional for a perfect drywall basement ceiling installation. Our experts at Executive Touch Painters have years of experience in basement renovations. So, Contact or Call us Now at (416)-410-0164 for a Free Estimate to know the cost of Drywall basement ceiling for your home.

Categories
Home Renovations

What is Stucco and What are its benefits?

Stucco, or Portland Cement Plaster, is applied to many buildings as a low-cost coating. It is available in a broad range of colors and textures, and it is durable, strong, and fire-resistant. Even though the method of applying stucco may look simple, it is better not to be done by yourself as any mistakes throughout the process could lead to serious problems.

What is Stucco Made Of?

Modern stucco is made of water, sand, and Portland cement materials mixed to form a plaster. But, other stucco options are made from a variety of raw materials. Traditional stucco, for instance, uses hydrated lime instead of Portland Cement. It is mixed on site and used in many layers.

What is Stucco Used For?

Stucco is applied by an industry expert to the interior and exterior walls. A specialist can apply the plaster by manually or with a machine. This Portland Cement Plaster may be used on a frame structure, or on concrete wall systems. It is used to cover concrete, or for siding, clay brick, cinder block, and more.

Benefits and Loses of Using Stucco?

The Advantages of Stucco

Stucco, or Portland Cement Plaster, is strong, low-cost, and durable coating. It is adaptable and can be used with concrete, wood frame, or steel frame, concrete masonry, brick. It also is utilized in a wide variety of climates. It is weather resistant, fire resistant and color retentive. So, Therefore, various pigments can be added to the plaster to give your stucco specifically the appearance that you are looking for.

The Disadvantages of Stucco

Stucco is rot resistant, versatile, and durable; but, it does not sustain very well in wet conditions. Stucco is pory so that water can seep through the material. This will make the material to decay. Additionally, the moisture may damage your home frame if it is exposed to water over a large amount of time.

One method to assist the stucco wall last by wet seasons is to complete areas like bottom footing or top of the home that get in contact with moisture the most in another material, such as vinyl or brick.

Repairing stucco materials is a challenge. House owners who live in wet or wintry climates will have to repair stucco more frequently. Although, any stucco repair is a challenge, as there are multiple layers that your contractor will need to fix. Stucco repairs are very time-consuming and costly.

One of the best signs of whether or not you must stucco your home is by looking around the neighborhood. If there are no stucco houses, then it’s apparently for weather-related causes. You can also ask a local stucco specialist to see if it’s appropriate for you.

Stucco Colors and Texture

In spite of being a low-cost construction surface, stucco is extensively used because it has a wide texture and color range. This gives stucco immense potential for home customization. Colour aggregate and pigments can change the color of the material. Experts will use white Portland Cement as a base to achieve the broadest color range.

Stucco could be applied in a textured fashion to achieve the appearance of other materials such as brick, wood, or stone. Specialists will use different aggregate sizes for various textures. This changes the consistency of the perfected mix. Several application techniques will also modify the stucco coating as well.

Can You Apply Stucco Yourself?

Though the application of Stucco may seem to be an easy method, the incorrect use of it can cause serious issues such as separating, bulging and cracking. The home timber frames may decay if moisture flows in through the stucco. It is suggested that you call in an expert.

Conclusion

A faulty stucco finish can cost you thousands of dollars to repair down the road. So don’t make your hands dirty and lose money. Simply pick your phone and call (416) 410 – 0164 to hire our professional stucco contractors in Toronto. They can assure that the stucco is correctly applied according to standardized measures so that it lasts many years.

Categories
Floors Home Renovations

Replacing vs Refinishing your Hardwood Flooring in Toronto

Most of the homes today are using Hardwood floors. For flooring, wood is a suitable choice material and can come in various styles, colors, and cuts. There are many advantages of this hardwood flooring. The main advantage is a long time investment. Houses with hardwood floor have more resale value. It’s also easy to clean. Quality hardwood floors are robust, hard-wearing and have long time durability. For these reasons, most of the homeowners in Toronto prefer hardwood floors.

Hardwood floors take a lot of pressure on them. Over time they become stained, chipped and became dull.

Factors for Deciding on Refinishing or Replacing Your Wood Floors.

1. Price

Price is the first variable to consider. Refinishing is cheaper than replacing. When replacing the price of the new wood and the cost of installation are to be considered. Refinishing cost can be obtained from your local floor renovators.

2. Aesthetics

If your primary goal is just to bring shine to the hardwood floor, simply refinish. It’s just easy to refinish the floor than replacing it. If you want to change the aspect of the floor or need to change the design of the flooring, then go for replacing the floor. Want to change the perspective of the floor itself, like the style of the wood, the direction of the planks or the consistency of the material? then go for an entire floor replacement. Refinishing is to restore existing while Replacing is to get new look or feel.

3. Time

Refinishing takes a lot of time than replacing the floor itself. It can take approximately five days, and the floor must remain completely untouched. The process requires sanders, edgers, buffers, scrapers, brushes, base coat sealers, topcoat sealers, putty knives and sometimes paint. On the other hand, replacement can be completed in less time.

4. Quality

You cannot just restore the wooden floor by just refinishing it. Refinishing is just adding cosmetics to your old floor. The process does not repair the damages if any present inside the wood. Before going for refinishing just check if there are any severe damages to the floor. If there are no critical damages, go for refinishing, else go for replacing.

5. Age of the Floor

Age of the floor is to consider before going for refinishing or replacement. Resistance may come from a wooden floor that is in place for many years. A floor of ¾ inches thick cannot take more than six times of refinishing process in its lifetime of 20 years. If the floor has already received sixth refinishing, then go for replacing it.

Refinishing a floor just gives a new look but not a new life to your floor. On the other hand replacing gives you a new floor with a new look and new added life to the floor, making your home look good. (If you are looking to repair a warped wood floor read this article.)

Conclusion

Still not able to decide on refinishing or replacing your hardwood flooring in Toronto? Don’t worry Contact us online or Call on 416.410.0164 to let our professionals at Executive Touch Painters inspect your floor to give a quick suggestion and new ideas for your wooden flooring.